Smart Camera App won't let me change wifi

[Bijington]

I have tried changing the wifi on my camera but I keep seeing this message

 
but as you can see I have this enabled

 

How do I fix this?

[Geomo]

@Bijington why will you change your wifi? The cameras are requiring 2,4 Mhz with IPv4 addresses and your smartphone needs to be connected to the same, new network.

[Bijington]

Currently the camera is trying to connect to our main router which is a distance from the camera. I have an access point near the camera but it wouldn’t connect. I have created a second 2.4GHz network on that access point and I wanted to connect the camera to that. When I tried it showed me the issue that I originally reported

[Geomo]

@Bijington Which camera do have? Eyes Außenkamera or Eyes Außenkamera II ? Please better use only 1 2,4 MHz WLAN. The Eyes Außenkamera didn‘t supports Mesh and you must switch of the power connection of the camera after installation of a repeater. When you switch on the power again, it which be connected to the strongest AP.

[Bijington]

I have this one https://community.bosch-smarthome.com/t5/c-edswj98253/Eyes+Au%2525C3%25259Fenkamera/pd-p/EyesAussenk... so the one that does not support mesh.

I recall I did have to turn off my access points when setting the camera up. This was 2 years ago. My issue now is that it  doesn’t connect to the access points. Or if it does it doesn’t for long. If I check in the app I can see the WiFi signal jumps between almost full and almost empty.

My idea was to create a second SSID on the closest access point so it will appear as a different network to the camera entirely and it should then just work but that is when I see the issue reported in my original post. Is that issue presenting because it doesn’t support this?