Danke @SmartHomeGuru , lass mich auf Englisch probieren 🙂
the position we agreed for the thermostat was not the best one, in the corridor. The heat from the tubes going to the other rooms heat already the area where the thermostat is, and the temperature in the bad (on the opposite side) drops because the actuator won't open (it is cold!). The only solution right now would be to the physical cabling again (opening walls and so on) to place a new thermostat in the bad, which we are not going to do ...
Hence the ask, if there is an option to install an actuator for the heating circuit that comes to the bad which can be activated remotely (ie. with the Funk Raumthermostat). If I understand it properly, this is possible with the regular radiator thermostat and the remote thermostat, but there's nothing that would allow me to control the actuator in the underfloor heating from a remote thermostat ...
This is possible with other manufacturers, and for Bosch would represent a strong opportunity to simplify these sort of situations. I can think of different ways this could actually be implemented (either from the actuator or from the thermostat). 🙂
I hope the request is clearer now? I think the term Funk-Stellmotor would be appropriate ...
Vielen Dank noch einmal
